Dometric
Home » Askubal » 2RS Version » KA-DRS » KA 14-DRS

KA 14-DRS

KA 14-DRS

2RS version

Special version adjustable clearance

2RS sealing

Inner ring:

  • Antifriction bearing steel, hardened, ground and polished.

Outer ring:

  • Brass lined with an antifriction film, consisting PTFE, cold formed around inner ring, outside diameter with thread, screwed into the housing and secured with the rubber bellows.

Rubber bellows:

  • Synthetic rubber with vulcanised brass slipring and steel locknut.

Housing:

  • Sizes 8 to 12 free-cutting steel, sizes 14 to 30 tempering steel (standardised), all sizes galvanized and chromatised.

Bushings:

  • Tempering steel, hardened, bore and outside diameter ground, pressed into the inner ring. They are only used as intake of the brass abrasive rings of the rubber bellows. Due to their low thickness they are not decicated to transmit radial and axial forces into the spherical bearing.

Tolerances:

  • Acc. to DIN ISO 12240-4, schedule K, except: d = H10, B =
SKU KA 14-DRS
A 14 mm
B 26 mm
C1 13.5 mm
d 12 mm
d1 17 mm
d2 Max. 37 mm
d3 M14
dk 25.4 mm
e 30 mm
h 60 mm
Hand Thread Right
l1 36 mm
l2 78.5 mm
Load Ratings Stat Co 24 kN
Mating Materials Steel on PTFE
Required Maintenance Maintenance-Free
Thread Male
Tilt - Angle 10 ?
Weight (0-Storke) 0.2 kg
: *
: *
: *
 
 
 
KA 8-DNR
 
KI 50
 
HRD 1T FU-105/1,10
 
 
 
 
 
HRD 1/2 T
 
SD 540-60
 
HRD 7 FU-120/15
 
 
 
 
 
P2620-50/20
 
KI 5
 
KA 16-D