Dometric
Home » Askubal » 2RS Version » KI/L-RS » KIL 8-RS

KIL 8-RS

KIL 8-RS

2RS version

Special version adjustable clearance

2RS sealing

Inner ring:

  • Antifriction bearing steel, hardened, ground and polished.

Bearing shells:

  • Both shells made of heavy duty bronze have a male thread and are screwed into the housing together with the inner ring, secured with the rubber bellows.

Rubber bellows:

  • Synthetic rubber with vulcanised brass slipring and steel locknut.

Housing:

  • Sizes 8 to 12 free-cutting steel, sizes 14 to 30 tempering steel (standardised), all sizes galvanized and chromatised.

Bushings:

  • Tempering steel, hardened, bore and outside diameter ground, pressed into the inner ring. They are only used as intake of the brass abrasive rings of the rubber bellows. Due to their low thickness they are not decicated to transmit radial and axial forces into the spherical bearing.

Lubricating nipple:

  • DIN 3405, shape D, further lubricating nipple shapes available on request.

Tolerances:

  • To DIN ISO 12240-4, schedule K, except: d = H10, B =
SKU KIL 8-RS
A 8 mm
B 19 mm
C1 9 mm
d 6 mm
d1 10.5 mm
d2 Max. 25 mm
d3 M8LH
d4 12.5 mm
d5 16 mm
dk 15.8 mm
e 20 mm
h1 36 mm
Hand Thread Left
l3 Min. 12 mm
l4 48.5 mm
Load Ratings Stat Co 12 kN
Mating Materials Steel on high-duty bronze
Required Maintenance Requires Maintenance
Thread Female
Tilt - Angle 9 ?
W 14 mm
Weight (0-Storke) 0.066 kg
: *
: *
: *
 
 
 
KAL 22-NR
 
KA 12-DRS
 
D 060
 
 
 
 
 
RD 0
 
SD 42
 
RAZ 9/1
 
 
 
 
 
KA 25
 
KAL 25-D
 
KA 16-NR