Dometric
Home » Askubal » ASKUROL Roller Bearing » KI/L-ZZ » KIL 20203-ZZ

KIL 20203-ZZ

KIL 20203-ZZ

Mounting sizes acc. to DIN ISO 12240-4 dimension series K

Inner ring:

  • Antifriction bearing steel, hardened, raceway precision ground.

Housing:

  • Made of case hardening steel, raceway hardened and precision ground.

Rolling element:

  • Barrel roller bearings made from through-hardened, antrifriction bearing steel.

Sealing washer:

  • Synthetic rubber-metal compound.

Lubrication:

  • The rod ends are given initail lubrication.

Note:

  • With these rod ends, it is important to ensure that the tilt angle specified in the table it not exceeded, either while mounting or during operation, otherwise the sealing washers may be damaged.

Max. permissible speed:

  • This is affected by the bearing load, the bearing clearance, the lubricant and heat output and input. The maximum permissible speed given in the tables applies for apurely radial load, normal bearing clearance tolerance, no external heat, an operating temperature which is not above the limit, and a low and absolutely shock-free load.

Special versions: available on request

SKU KIL 20203-ZZ
B 21 mm
b3 18 mm
C1 15 mm
d 16 mm
d1 19.3 mm
d2 Max. 43 mm
d3 M16LH
d4 22 mm
d5 27 mm
e1 35 mm
h1 64 mm
Hand Thread Left
l3 Min. 24 mm
l4 85.5 mm
Limiting Speed 650 min-1
Load Ratings Bearing Dyn C 13.3 kN
Load Ratings Bearing Stat CO 9 kN
Load Ratings Housing Stat CO 28 kN
Required Maintenance Low Maintenance
Thread Female
Tilt - Angle 7 ?
W 22 mm
Weight (0-Storke) 0.2 kg
: *
: *
: *
 
 
 
P3120-160/40
 
KIL 50
 
KAL 20-D
 
 
 
 
 
KAL 30-DNR
 
KA 20-RS
 
2D 045
 
 
 
 
 
HRD 65/2
 
SD 7 FU-80/7,5
 
RAZ 100/1