Dometric
Home » Askubal » Standard » KI/L » KIL 30

KIL 30

KIL 30

DIN ISO 12240-4 dimension series K

Inner ring:

  • Antifriction bearing steel, hardened, ground and polished.

Outer ring:

  • Swaged around the inner ring, sliding face made of high-duty bronze. Lubricant is distributed via the lubrication groove in the outer ring.

Housing:

  • Sizes 3 to 12 free-cutting steel, sizes 14 to 50 tempering steel (standardised), all sizes galvanized and chromatised. The spherical bearing is pressed into the housing and caulked at both sides.

Lubrication nipple:

  • Sizes 3 and 5 without lubrication nipple. Sizes 6 to 50 lubrication nipple DIN 3405, shape D.

Special versions:

  • Housing heat-treated, for static load capacity C0 see-V
  • Housing made from high-grade tempering steel (heat-treated), for static load capacity C0 see -L
  • Housing crack-tested
  • Sliding face of inner ring 5 um to 10 um hard chromium plated
  • Further versions available on request.
SKU KIL 30
B 37 mm
C1 25 mm
d 30 mm
d1 34.8 mm
d2 Max. 71 mm
d3 M30x2LH
d4 40 mm
d5 50 mm
dk 50.8 mm
h1 110 mm
Hand Thread Left
l3 Min. 45 mm
l4 145.5 mm
Load Ratings Stat C0 -L 182 kN
Load Ratings Stat C0 -V 107 kN
Load Ratings Stat Co 82 kN
Mating Materials Steel on high-duty bronze
Required Maintenance Requires Maintenance
Thread Female
Tilt - Angle 15 ?
W 41 mm
Weight (0-Storke) 1.15 kg
: *
: *
: *
 
 
 
HRD 14T FU-105/1,50
 
HRD 60/7
 
SD 7 FUK-80/7,5
 
 
 
 
 
RA 9/1 D
 
2SD 820 - 60/17,30
 
P2020-50/20
 
 
 
 
 
KIL 6-D
 
KUA 8-ZZ
 
KJL 5-BD