Dometric
Home » Askubal » Standard » KI/L » KIL 40

KIL 40

KIL 40

DIN ISO 12240-4 dimension series K

Inner ring:

  • Antifriction bearing steel, hardened, ground and polished.

Outer ring:

  • Swaged around the inner ring, sliding face made of high-duty bronze. Lubricant is distributed via the lubrication groove in the outer ring.

Housing:

  • Sizes 3 to 12 free-cutting steel, sizes 14 to 50 tempering steel (standardised), all sizes galvanized and chromatised. The spherical bearing is pressed into the housing and caulked at both sides.

Lubrication nipple:

  • Sizes 3 and 5 without lubrication nipple. Sizes 6 to 50 lubrication nipple DIN 3405, shape D.

Special versions:

  • Housing heat-treated, for static load capacity C0 see-V
  • Housing made from high-grade tempering steel (heat-treated), for static load capacity C0 see -L
  • Housing crack-tested
  • Sliding face of inner ring 5 um to 10 um hard chromium plated
  • Further versions available on request.
SKU KIL 40
B 49 mm
C1 33 mm
d 40 mm
d1 45.2 mm
d2 Max. 91 mm
d3 M42x2LH
d4 53 mm
d5 65 mm
dk 66.6 mm
h1 142 mm
Hand Thread Left
l3 Min. 60 mm
l4 187.5 mm
Load Ratings Stat Co 145 kN
Mating Materials Steel on high-duty bronze
Required Maintenance Requires Maintenance
Thread Female
Tilt - Angle 17 ?
W 55 mm
Weight (0-Storke) 2.4 kg
: *
: *
: *
 
 
 
KJL 16-BD
 
KAL 22
 
SD 2n-1
 
 
 
 
 
KAL 50
 
KAL 25-D
 
KIL 5-DNR
 
 
 
 
 
KAL 22-DNR
 
KI 30-DNRM27x2
 
KAL 18-400