Home » Askubal » Standard » KA-D » KA 10-D

KA 10-D

KA 10-D

DIN ISO 12240-4 dimension series K

Inner ring:

  • Antifriction bearing steel, hardened, ground and polished.

Outer ring:

  • Swaged around the inner ring, sliding face made of high-duty bronze. Lubricant is distributed via the lubrication groove in the outer ring.


  • Sizes 5 to 12 free-cutting steel, sizes 14 to 50 tempering steel (standardised), all sizes galvanized and chromatised. The spherical bearing is pressed into the housing and caulked at both sides.

Special versions:

  • Housing heat-treated, for static load capacity C0 see-V
  • Housing made from high-grade tempering steel (heat-treated), for static load capacity C0 see -L
  • Housing crack-tested
  • Sliding face of inner ring 5 um to 10 um hard chromium plated
  • Further versions available on request.
B 14 mm
C1 10.5 mm
d 10 mm
d1 12.9 mm
d2 Max. 29 mm
d3 M10
dk 19 mm
h1 48 mm
Hand Thread Right
l1 Min. 28 mm
l2 62.5 mm
Load Ratings Stat C0 -L 27 kN
Load Ratings Stat C0 -V 19 kN
Load Ratings Stat Co 15 kN
Mating Materials Steel on PTFE
Required Maintenance Maintenance-Free
Thread Male
Tilt - Angle 13 ?
Weight (0-Storke) 0.054 kg
: *
: *
: *
KAL 12-402
SD 2n-1
SE 20-50
SD 9-1
RA 9 D
KIL 16
KIL 10-D
KA 20-RS