KAL 18-D

DIN ISO 12240-4 dimension series K Inner ring: Antifriction bearing steel, hardened, ground and polished. Outer ring: Swaged around the inner ring, sliding face made of high-duty bronze. Lubricant is distributed via the lubrication groove in the outer ring. Housing: Sizes 5 to 12 free-cutting steel, sizes 14 to 50 tempering steel (standardised), all sizes galvanized and chromatised. The spherical bearing is pressed into the housing and caulked at both sides. Special versions: Housing heat-treated, for static load capacity C0 see-V Housing made from high-grade tempering steel (heat-treated), for static load capacity C0 see -L Housing crack-tested Sliding face of inner ring 5 um to 10 um hard chromium plated Further versions available on request.

SKU	KAL 18-D
B	23 mm
C1	16.5 mm
Thread	Male
d	18 mm
d1	21.8 mm
d2 Max.	47 mm
d3	M18x1.5LH
dk	31.7 mm
h1	72 mm
Hand Thread	Left
l1 Min.	41 mm
l2	95.5 mm
Load Ratings Stat C0 -L	77 kN
Load Ratings Stat C0 -V	49 kN
Load Ratings Stat Co	39 kN
Mating Materials	Steel on PTFE
Required Maintenance	Maintenance-Free
Tilt - Angle	15 ?
Weight (0-Storke)	0.26 kg