Home » Askubal » Standard » KA/L-D » KAL 22-D

KAL 22-D

KAL 22-D

DIN ISO 12240-4 dimension series K

Inner ring:

  • Antifriction bearing steel, hardened, ground and polished.

Outer ring:

  • Swaged around the inner ring, sliding face made of high-duty bronze. Lubricant is distributed via the lubrication groove in the outer ring.


  • Sizes 5 to 12 free-cutting steel, sizes 14 to 50 tempering steel (standardised), all sizes galvanized and chromatised. The spherical bearing is pressed into the housing and caulked at both sides.

Special versions:

  • Housing heat-treated, for static load capacity C0 see-V
  • Housing made from high-grade tempering steel (heat-treated), for static load capacity C0 see -L
  • Housing crack-tested
  • Sliding face of inner ring 5 um to 10 um hard chromium plated
  • Further versions available on request.
B 28 mm
C1 20 mm
d 22 mm
d1 25.8 mm
d2 Max. 55 mm
d3 M22x1.5LH
dk 38.1 mm
h1 84 mm
Hand Thread Left
l1 Min. 48 mm
l2 111.5 mm
Load Ratings Stat C0 -L 101 kN
Load Ratings Stat C0 -V 70 kN
Load Ratings Stat Co 54 kN
Mating Materials Steel on PTFE
Required Maintenance Maintenance-Free
Thread Male
Tilt - Angle 15 ?
Weight (0-Storke) 0.435 kg
: *
: *
: *
KI 30-RS
KAL 10-400
SD 52-50
RD 16
KIL 50-D
KAL 50-D