KAL 40-D

DIN ISO 12240-4 dimension series K Inner ring: Antifriction bearing steel, hardened, ground and polished. Outer ring: Swaged around the inner ring, sliding face made of high-duty bronze. Lubricant is distributed via the lubrication groove in the outer ring. Housing: Sizes 5 to 12 free-cutting steel, sizes 14 to 50 tempering steel (standardised), all sizes galvanized and chromatised. The spherical bearing is pressed into the housing and caulked at both sides. Special versions: Housing heat-treated, for static load capacity C0 see-V Housing made from high-grade tempering steel (heat-treated), for static load capacity C0 see -L Housing crack-tested Sliding face of inner ring 5 um to 10 um hard chromium plated Further versions available on request.

SKU	KAL 40-D
B	49 mm
C1	33 mm
Thread	Male
d	40 mm
d1	45.2 mm
d2 Max.	91 mm
d3	M42x2LH
dk	66.6 mm
h1	150 mm
Hand Thread	Left
l1 Min.	90 mm
l2	195.5 mm
Load Ratings Stat Co	132 kN
Mating Materials	Steel on PTFE
Required Maintenance	Maintenance-Free
Tilt - Angle	17 ?
Weight (0-Storke)	2.3 kg