Dometric
Home » Askubal » Standard » KA/L » KAL 35

KAL 35

KAL 35

DIN ISO 12240-4 dimension series K

Inner ring:

  • Antifriction bearing steel, hardened, ground and polished.

Outer ring:

  • Swaged around the inner ring, sliding face made of high-duty bronze. Lubricant is distributed via the lubrication groove in the outer ring.

Housing:

  • Sizes 3 to 12 free-cutting steel, sizes 14 to 50 tempering steel (standardised), all sizes galvanized and chromatised. The spherical bearing is pressed into the housing and caulked at both sides.

Lubrication nipple:

  • Sizes 3 and 5 without lubrication nipple. Sizes 6 to 50 lubrication nipple DIN 3405, shape D. Further lubrication nipple shapes available on request.

Special versions:

  • Housing heat-treated, for static load capacity C0 see-V
  • Housing made from high-grade tempering steel (heat-treated), for static load capacity C0 see -L
  • Housing crack-tested
  • Sliding face of inner ring 5 um to 10 um hard chromium plated
  • Further versions available on request.
SKU KAL 35
B 43 mm
C1 28 mm
d 35 mm
d2 Max. 81 mm
d3 M36x2LH
dk 57 mm
h1 140 mm
Hand Thread Left
l1 Min. 85 mm
l2 180.5 mm
Load Ratings Stat Co 96 kN
Mating Materials Steel on high-duty bronze
Required Maintenance Requires Maintenance
Thread Male
Tilt - Angle 16 ?
Weight (0-Storke) 1.64 kg
: *
: *
: *
 
 
 
KIL 30-DRS
 
KAL 25-DRS
 
KA 8-401
 
 
 
 
 
HRD 1T FU-105/0,75
 
HRD 65 FUK-100/5,50
 
SD 22-60
 
 
 
 
 
2SD 720 - 60/3,45
 
RA 4/1 D
 
KA 12-DNR