KAL 50

DIN ISO 12240-4 dimension series K Inner ring: Antifriction bearing steel, hardened, ground and polished. Outer ring: Swaged around the inner ring, sliding face made of high-duty bronze. Lubricant is distributed via the lubrication groove in the outer ring. Housing: Sizes 3 to 12 free-cutting steel, sizes 14 to 50 tempering steel (standardised), all sizes galvanized and chromatised. The spherical bearing is pressed into the housing and caulked at both sides. Lubrication nipple: Sizes 3 and 5 without lubrication nipple. Sizes 6 to 50 lubrication nipple DIN 3405, shape D. Further lubrication nipple shapes available on request. Special versions: Housing heat-treated, for static load capacity C0 see-V Housing made from high-grade tempering steel (heat-treated), for static load capacity C0 see -L Housing crack-tested Sliding face of inner ring 5 um to 10 um hard chromium plated Further versions available on request.

SKU	KAL 50
B	60 mm
C1	45 mm
Thread	Male
d	50 mm
d2 Max.	117 mm
d3	M48x2LH
dk	82 mm
h1	185 mm
Hand Thread	Left
l1 Min.	105 mm
l2	243.5 mm
Load Ratings Stat Co	209 kN
Mating Materials	Steel on high-duty bronze
Required Maintenance	Requires Maintenance
Tilt - Angle	12 ?
Weight (0-Storke)	4.8 kg