Home » Askubal » Standard » KI/L-D » KIL 18-D

KIL 18-D

KIL 18-D

DIN ISO 12240-4 dimension series K

Inner ring:

  • Antifriction bearing steel, hardened, ground and polished.

Outer ring:

  • Swaged around the inner ring, sliding face made of high-duty bronze. Lubricant is distributed via the lubrication groove in the outer ring.


  • Sizes 5 to 12 free-cutting steel, sizes 14 to 50 tempering steel (standardised), all sizes galvanized and chromatised. The spherical bearing is pressed into the housing and caulked at both sides.

Special versions:

  • Housing heat-treated, for static load capacity C0 see-V
  • Housing made from high-grade tempering steel (heat-treated), for static load capacity C0 see -L
  • Housing crack-tested
  • Sliding face of inner ring 5 um to 10 um hard chromium plated
  • Further versions available on request.
B 23 mm
C1 16.5 mm
d 18 mm
d1 21.8 mm
d2 Max. 47 mm
d3 M18x1.5LH
d4 25 mm
d5 31 mm
dk 31.7 mm
h1 71 mm
Hand Thread Left
l3 Min. 27 mm
l4 94.5 mm
Load Ratings Stat C0 -L 77 kN
Load Ratings Stat C0 -V 49 kN
Load Ratings Stat Co 39 kN
Mating Materials Steel on PTFE
Required Maintenance Maintenance-Free
Thread Female
Tilt - Angle 15 ?
W 27 mm
Weight (0-Storke) 0.295 kg
: *
: *
: *
KA 12
KA 25-D
KAL 30-D
KA 25-RS
SD 62-50
HRD 2 FU-130/7,5
SD 120-50