Home » Askubal » Standard » KI/L-D » KIL 25-D

KIL 25-D

KIL 25-D

DIN ISO 12240-4 dimension series K

Inner ring:

  • Antifriction bearing steel, hardened, ground and polished.

Outer ring:

  • Swaged around the inner ring, sliding face made of high-duty bronze. Lubricant is distributed via the lubrication groove in the outer ring.


  • Sizes 5 to 12 free-cutting steel, sizes 14 to 50 tempering steel (standardised), all sizes galvanized and chromatised. The spherical bearing is pressed into the housing and caulked at both sides.

Special versions:

  • Housing heat-treated, for static load capacity C0 see-V
  • Housing made from high-grade tempering steel (heat-treated), for static load capacity C0 see -L
  • Housing crack-tested
  • Sliding face of inner ring 5 um to 10 um hard chromium plated
  • Further versions available on request.
B 31 mm
C1 22 mm
d 25 mm
d1 29.5 mm
d2 Max. 61 mm
d3 M24x2LH
d4 33.5 mm
d5 42 mm
dk 42.8 mm
h1 94 mm
Hand Thread Left
l3 Min. 36 mm
l4 124.5 mm
Load Ratings Stat C0 -L 131 kN
Load Ratings Stat C0 -V 78 kN
Load Ratings Stat Co 60 kN
Mating Materials Steel on PTFE
Required Maintenance Maintenance-Free
Thread Female
Tilt - Angle 15 ?
W 36 mm
Weight (0-Storke) 0.65 kg
: *
: *
: *
KA 16-401
RD 92
SE 22-60
HRD 7/12
SD 42-50
KAL 22-D
KI 35-D