Dometric
Home » Askubal » Standard » KI/L » KIL 20

KIL 20

KIL 20

DIN ISO 12240-4 dimension series K

Inner ring:

  • Antifriction bearing steel, hardened, ground and polished.

Outer ring:

  • Swaged around the inner ring, sliding face made of high-duty bronze. Lubricant is distributed via the lubrication groove in the outer ring.

Housing:

  • Sizes 3 to 12 free-cutting steel, sizes 14 to 50 tempering steel (standardised), all sizes galvanized and chromatised. The spherical bearing is pressed into the housing and caulked at both sides.

Lubrication nipple:

  • Sizes 3 and 5 without lubrication nipple. Sizes 6 to 50 lubrication nipple DIN 3405, shape D.

Special versions:

  • Housing heat-treated, for static load capacity C0 see-V
  • Housing made from high-grade tempering steel (heat-treated), for static load capacity C0 see -L
  • Housing crack-tested
  • Sliding face of inner ring 5 um to 10 um hard chromium plated
  • Further versions available on request.
SKU KIL 20
B 25 mm
C1 18 mm
d 20 mm
d1 24.3 mm
d2 Max. 51 mm
d3 M20x1.5LH
d4 27.5 mm
d5 34 mm
dk 34.9 mm
h1 77 mm
Hand Thread Left
l3 Min. 30 mm
l4 102.5 mm
Load Ratings Stat C0 -L 78 kN
Load Ratings Stat C0 -V 50 kN
Load Ratings Stat Co 42 kN
Mating Materials Steel on high-duty bronze
Required Maintenance Requires Maintenance
Thread Female
Tilt - Angle 15 ?
W 30 mm
Weight (0-Storke) 0.38 kg
: *
: *
: *
 
 
 
KIL 12-RS
 
KA 10-DRS
 
KAL 16-402
 
 
 
 
 
SD 64-60
 
HRD 60
 
P2020-50/20
 
 
 
 
 
KAL 40
 
KIL 10-NR
 
KAL 30-DNR